PASS
PASS is an advanced scheduling and dispatching application developed to support the coordinated transportation efforts of demand response transit services.
PASS release note tables have been divided by category for easy reference to the software.
PASS tasks may be found in TP4 release notes or in TP6 release notes.
Trapeze4 Workstation
The Trapeze4 Workstation is the Trapeze interface most commonly used by PASS.
This section contains general corrections and enhancements that relate to PASS within the
Trapeze4 Workstation.
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | CORR | Fixed an issue in the Trapeze 4 workstation. When Services address () was different from the Publish Event address (), Publish Event address did not receive events. | PASS-21633 |
| TP4 21.2.1.0 | CORR | Fixed an issue, where the PASS system ignored MAXOBT when using Service Based Scheduling. The system provided scheduling solutions that violated MaxOBT, but did not indicate that violations had occurred. This issue will occur if ParaserviceId is not provided, therefore using Service Based Scheduling. | PASS-21908 |
| TP4 21.2.1.0 | CORR | Fixed an issue, where exception error was thrown. Exception error happened when clicking on Tracker Action Browser from Trip Admin and Schedule Editor, then closing Schedule Editor. | PASS-22231 |
| TP4 21.2.1.0 | CORR | Fixed an issue where Config DSN and Profile did not update and save when successfully logged into Trapeze workstation. | PASS-21949 |
| TP4 21.2.1.0 | CORR | Fixed an issue in the Client/Booking Info screen, where Suspend field did not show dates and Exclamation icon does not appear beside it. | PASS-21983 |
| TP4 21.2.1.0 | CORR | Fixed an issue in Trapeze4, where user account was locked out after a password reset. | PASS-22056 |
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | CORR | Fixed an issue where a provider job agent job was cancelling other provider bookings. | PASS-22304 |
| TP4 21.4.1.0 | CORR | Fixed an issue where Batch Job Agent could not be authenticated. | PASS-22321 |
| TP4 21.4.1.0 | CORR | Fixed an issue in workstation, where if Password Age and Password Age warnings were used in a transit site setup, then a password could not be reset. | PASS-22436 |
| TP4 21.4.1.0 | CORR | Fixed an issue where when Employee record was modified in Trapeze4 workstation, key OPS information was being deleted from the EmployeeStatus table. | PASS-22499 |
| TP4 21.4.1.0 | CORR | Fixed an issue where nak text messages could not be sent to vehicles. | PASS-22485 |
| TP4 21.4.1.0 | CORR | Fixed an issue where street labels did not show in the map when enabled. | PASS-22371 |
| TP4 21.4.1.0 | CORR | Fixed a Client Alert issue, where if Alert was closed for 1 client, it changed the closed status to YES for other clients. | PASS-22302 |
| TP4 21.5.1.0 | CORR | Fixed an issue where the custom grid icon was greyed out on the Vehicles screen. | PASS-22372 |
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | CORR | Fixed an issue where the Set Mode dropdown list boxes were blank when used with Oracle databases. | PASS-22876 |
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | CORR | Fixed an issue where Mmsw41.exe (Trapeze4 workstation) had parse errors with Oracle 19c. | PASS-22898 |
| TP4 21.12.0.0 | CORR | Fixed an issue with the Adjust Break Time feature where the Early time and Late time were not adjusted correctly relative to the ETA of the run. | PASS-23206 |
| TP4 21.13.0.0 | CORR | Fixed an issue where the Client/Booking Info dialog box was filtering out alpha-numeric characters when handling phone numbers. It appeared differently on the Clients screen. | PASS-22653 |
| TP4 21.13.0.0 | CORR | Fixed an issue where Job Agent batches were changing the SchTime on trips. | PASS-22590 |
| TP4 21.13.0.0 | CORR | Fixed an issue where Emergency phone number could not be selected in the Client / Booking Info dialog box. The field was greyed out. | PASS-22421 |
| TP4 21.14.0.0 | CORR | Fixed an issue where in Set Mode Fast and Set Mode dialog boxes, schedule type data did not appear inside the Schedule Type drop-down list box. Therefore, there were no options to select in the drop-down list box. | PASS-23329 |
| TP4 21.14.0.0 | CORR | Fixed an issue where a TripBroker ride was not displaying correct information in Driver/Vehicle Information dialog box in the Trapeze4 Workstation. | PASS-23325 |
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | CORR |
Fixed an issue where there was confusion with the FareToCollect Column in the Run Itinerary view of Schedule Editor when the faring algorithm resets FareToCollect to FareCollected. Now, a FareDeducted column is added to the Run Itinerary view. FareDeducted is stored at the booking record level. |
PASS-23331 |
| TP4 21.18.0.0 | No changes in this build. |
Switches
Switches turn specific system functionality on and off, or modify how the system functionality works.
Switches are found in different places in the system. For example, in the Trapeze6 Service Shell in and in the Trapeze4 Workstation. Typically, when a switch is seen in multiple locations, its settings should match in all places.
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | No changes in this build. | ||
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | No changes in this build. | ||
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
Security Permissions
Security permissions define features within PASS to which users can either be given access or denied access.
Security permissions are found in the Trapeze6 Client Shell and in web-based
interfaces.
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | No changes in this build. | ||
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | No changes in this build. | ||
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
System Properties
Trapeze4 system properties define certain aspects of system behavior.
System properties are found in the Trapeze4 Workstation under .
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | No changes in this build. | ||
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | No changes in this build. | ||
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
Ancillary Data and Supplementary Data
Ancillary data allows transit sites to customize the information system users see when they
work in the Trapeze4 Workstation. Supplementary data provides additional opportunities for
customization.
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
|
TP4 21.4.1.0 |
CORR | Fixed an issue in Travel Exclusion Rules ancillary data, where a new rule that was created could not be deleted. | PASS-22251 |
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | No changes in this build. | ||
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | CORR | Fixed an issue where Trapeze4 workstation crashed after doing a search in the Schedule Booking Wizard. | PASS-23293 |
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
Runs
Runs allows users to define master, template, and daily runs to which trips may be scheduled.
Runs is found in the Trapeze4 Workstation by clicking .
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | No changes in this build. | ||
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | No changes in this build. | ||
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
Client Registration
Client Registration allows you to register clients, update client history, and define a client’s eligibility for paratransit service.
Client Registration is found in the Trapeze4 Workstation by clicking .
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | No changes in this build. | ||
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | CORR | Fixed an issue where clicking the Select button, in the pictures tab of the Clients screen caused the workstation to crash. | PASS-22740 |
| TP4 21.7.0.0 | CORR | Fixed an issue where adding a common location by street number in Client registration did not pull the location's details such as ID, comments, etc. | PASS-22690 |
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | CORR | Fixed an issue where Vehicle Type Exclusions associated with a home address were removed after a booking was saved. | PASS-23137 |
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | CORR | Fixed an issue that caused Vehicle Type Exclusions to still appear on a booking even though they were previously removed from an address. | PASS-23241 |
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0. | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | ENH |
In PASS (Trapeze4 Workstation), The gender field was updated in the Client Registration Screen to allow more gender options. |
PASS-23555 |
| TP4 21.18.0.0 | CORR |
Fixed an issue in Client Registration where the ParaServices dropdown list did not set to the same value set in the Certification on the Fly system property. |
PASS-23545 |
| TP4 21.18.0.0 | CORR |
Fixed an issue where searching for client middle names in Find Clients did not produce results. |
PASS-23550 |
Trip Booking
Trip Booking allows users to create casual or subscription trips for clients.
Trip Booking is found in the Trapeze4 Workstation by clicking .
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | CORR | Fixed an issue, where you could not book trips with SmartCard ID. The following error message was displayed, "SmartCard validation...cannot connect to SrvShell." Security permission: PASS/PassInfoServer/Public Methods is no longer required for smart card validation. | PASS-21848 |
| TP4 21.2.1.0 | CORR | Fixed an issue, where supplementary data fields added to daily runs did not load. | PASS-21855 |
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | ENH | A new feature was added that limits the amount of bookings based on paraservice type. | PASS-21884 |
| TP4 21.4.1.0 | CORR | Fixed an issue, where the LT time for a drop-off disappeared for a saved booking with Req drop-off checkbox selected. | PASS-21905 |
| TP4 21.4.1.0 | CORR | Fixed an issue, where clients that were added to a group booking were not saved. Only one client showed in the group booking. | PASS-22345 |
| TP4 21.4.1.0 | CORR | Fixed an issue where the Booking screen separated from the workstation and the task menu disappeared when the req time was changed in the Fare Calculator. | PASS-22342 |
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | CORR | The following are two new warning prompts added to the
workstation:
|
PASS-22753 |
| TP4 21.6.0.0 | CORR | Fixed an issue where navigating from another screen to Trip Booking and making no changes will still show the "Save changes before exiting?" prompt. | PASS-22746 |
| TP4 21.6.0.0 | CORR | Fixed an issue where a location name in Trip Booking did not match the location name in Schedule Editor. | PASS-22027 |
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | CORR | Fixed an issue where the IVR notification preferences for a booking were deleted after the trip was saved in Trip Booking. | PASS-23105 |
| TP4 21.10.0.0 | CORR | Fixed an issue where Call-back Status field in Trip Booking did not update. Field should display Sent instead of Unsent. | PASS-23067 |
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | CORR | Fixed an issue where saving a booking in Trapeze4 workstation took excessive time. This typically occurred after confirming the service area in the booking process. | PASS-23297 |
| TP4 21.13.0.0 | CORR | Fixed an issue where when DO (drop-off) logic was enabled, it did not apply to a booking. | PASS-22519 |
| TP4 21.14.0.0 | CORR | Fixed an issue where when saving booking using ReqDO logic, LT time for drop off would disappear. | PASS-23314 |
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
Faring
Faring is about how clients are charged for trips.
Fare type options are defined in ancillary data under . Faring is used throughout PASS and fare types are seen in various places, including Client Registration, Trip Booking, and Schedule Editor.
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | No changes in this build. | ||
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | CORR | Fixed an issue where the display size of the Fare Summary dialog box was too small. | PASS-22967 |
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | No changes in this build. | ||
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
Trip Administration
Trip Administration allows users to look up trip information and to maintain and update subscription and casual bookings.
Trip Administration is found in the Trapeze4 Workstation by clicking .
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | CORR | Fixed an issue in Trip Admin where when searching pick up/drop offs by location and enabling Toggle Search Type to On, search results did not show accurate number of clients. | PASS-22357 |
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | ENH | In Trip Admin, you can now sort by booking id by clicking BookingId column header in the grid. | PASS-22790 |
| TP4 21.6.0.0 | CORR | Fixed an issue where a warning pop-up did not appear when a new booking was created for a suspended client. Pop-up should have warned of the new booking falling within the suspended date range. | PASS-22484 |
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | CORR | Fixed an issue where Trip Admin was slow displaying and sorting bookings by scheduled time. | PASS-22942 |
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | CORR | Fixed an issue where background colors were not consistent for locked and frozen events in Trip Admin and Schedule Editor. | PASS-23274 |
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
Schedule Administrator
Schedule Administrator is an application used by system administrators to for preliminary schedule work. For example, defining schedule types, adding schedules, and loading schedules.
Schedule Administrator (SAdm41.exe) is typically found in the same folder as the Trapeze4 Workstation (Mmsw41.exe).
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | No changes in this build. | ||
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | ENH | You can now reset the Schedule Server from the Schedule Administrator application. There is now a Schedule/Reload All menu button. The reset will attempt to stop all the threads that may access schedules, unload all schedule objects, and reload schedules defined in the schedule load list. During the reset, all scheduling requests are disabled and will return a error. If all schedules are successfully unloaded, then static data will be reloaded and a message: "Static data loaded" will appear in the Schedule Server log. | PASS-20758 |
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | No changes in this build. | ||
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
Schedule Editor
Schedule Editor is a powerful tool used to access trip information and make schedule changes.
Schedule Editor is found in the Trapeze4 Workstation by clicking .
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | CORR | Fixed an issue, where Schedule Editor's run graphical view did not continuously refresh. | PASS-2187 |
|
TP4 21.3.0.0 |
CORR | Fixed an issue with Sched Multi Parameter where a parameter set was not used when multiple bookings were selected. | PASS-22262 |
|
TP4 21.4.1.0 |
CORR | Fixed an issue in the Schedule Editor, where trips were not sorted correctly in unscheduled trips view. | PASS-22291 |
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | CORR | Fixed an issue in Schedule Editor where Find function and then selecting run, and Search Run did not auto-fill a run search correctly when a unique run number was entered, for example, 319R. When entering a partial run number to begin the search, the auto-fill pulls in additional data instead of the run number. | PASS-23114 |
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | No changes in this build. | ||
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | ENH | Fixed an issue where there was confusion with the FareToCollect Column in the Run Itinerary view of Schedule Editor when the faring algorithm resets FareToCollect to FareCollected. Now, a FareDeducted column is added to the Run Itinerary view. FareDeducted is stored at the booking record level. | PASS-23331 |
| TP4 21.15.0.0 | ENH | Fixed an issue where schedules with large Revenue Run Distance (in Schedules view) won’t load. | PASS-23321 |
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | CORR |
Fixed an issue in Schedule Editor where time fields could only be edited by highlighting a cell and typing a value. Time fields could not be edited by mouse clicking. |
PASS-23551 |
Schedule Server
Schedule Server is an application that performs scheduling functions for PASS. For example,
matching template trips to live schedule trips, devising estimated trip times, creating run
itineraries, and calculating provider costs.
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes in this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | No changes in this build. | ||
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | No changes in this build. | ||
| TP4 21.7.0.0 | No changes in this build. | ||
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | No changes in this build. | ||
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | No changes in this build. | ||
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |
Wizards
Wizards are typically used to locate information or update records and are accessed from various PASS screens (for example, Client Registration, Trip Booking, or Trip Administration).
Wizards include the Client Change Wizard, the Subscription Change Wizard, the Location Change Wizard, and the Street Wizard.
| Version | Type | Description | ID |
|---|---|---|---|
| TP4 21.1.1.0 | No changes in this build. | ||
| TP4 21.2.1.0 | No changes for this build. | ||
| TP4 21.3.0.0 | No changes in this build. | ||
| TP4 21.4.1.0 | CORR | Fixed an issue where Schedule Parameters and Violations buttons on the toolbar did not always display the selected set name when trips were scheduled in the Schedule Booking Wizard. Also, maps did not always display the pickups and drop offs for the selected scheduling solution when MapDisplay and Follow were enabled. | PASS-22276 |
| TP4 21.4.1.0 | CORR | Fixed an issue where payment type changes for subscription bookings done in the Subscription Change Wizard did not update in live or template bookings. | PASS-21176 |
| TP4 21.5.1.0 | No changes in this build. | ||
| TP4 21.6.0.0 | CORR | Fixed an issue where pull out and break address changes were not reflected in the Schedule Booking Wizard when searched for. | PASS-22762 |
| TP4 21.6.0.0 | CORR | Fixed an issue where Max OBT was not time stamped on multiple bookings in the Schedule Booking Wizard, which allowed longer on board times. | PASS-22366 |
| TP4 21.7.0.0 | CORR | The following improvements were added to allow rescheduling bookings with
DropOff reqtime by Batch or Schedule Booking Wizard.
|
PASS-22805 |
| TP4 21.8.0.0 | No changes in this build. | ||
| TP4 21.9.0.0 | CORR | Fixed an issue where the formatting and defaults applied to Booking Supplementary Data fields were not reflected as the same in the dialog boxes. | PASS-22769 |
| TP4 21.10.0.0 | No changes in this build. | ||
| TP4 21.11.0.0 | No changes in this build. | ||
| TP4 21.12.0.0 | No changes in this build. | ||
| TP4 21.13.0.0 | CORR | Fixed an issue where the following alert pop-up: Vehicle Type does not match that of assigned vehicle for runs. The vehicle’s VehicleType will be used appeared in the Run Change Wizard. However, when runs were changed manually, alert pop-up did not appear. | PASS-22961 |
| TP4 21.14.0.0 | No changes in this build. | ||
| TP4 21.15.0.0 | No changes in this build. | ||
| TP4 21.16.0.0 | No changes in this build. | ||
| TP4 21.17.0.0 | No changes in this build. | ||
| TP4 21.18.0.0 | No changes in this build. |