Blocking

Version	Type	Description	ID
19.0.1.0	CORR	The following issues have been fixed in the Garage Assignment dialog box: An exception access violation error occurred when users chose Remove All and Assign All when attempting to assign garages. An Invalid book mark warning appeared when users selected an exception combination other than Off which a trip was not assigned.	FX-8916
19.0.2.0	CORR	The issues with some garages and garage information being removed when assigning garages in the Garage Assignment dialog box have been fixed.	FX-9068 The task is related to FX-9058.
19.0.2.0	CORR	The issue of the Pull-in comments not being copied when Copy Trips was applied in the Trips screen has been fixed.	FX-9003
19.0.4.0	ENH	Two fields, Divisions and Vehicle Types have been added in the Peak Vehicle Requirements dialog box. When users open the dialog box, the option, (All) appears in both fields by default.	FX-8720
19.0.4.0	CORR	The issue of the Maintain Hooks parameter not being applied during Automatic Blocking when there was a large number of previously blocked trips in the same line group has been fixed.	FX-9093
19.0.4.0	CORR	The issue of pull-in/pull-out events being deleted from Trip times across all sign-up periods has been fixed.	FX-9171 This task is related to FX-9100.
19.0.4.0	CORR	Improved appearance of highlighted trips with more than one exception in the Blocking screen.	FX-9177
19.0.6.0	CORR	The issue of the block IDs with 9 digits not being reloaded completely has been fixed. Previously, when the blocks were exported, and then reloaded, the last digit of the block IDs were omitted.	FX-9039
19.0.6.0	CORR	The exception error that occurred after clicking the Remove All and Assign All buttons to assign garages in the Garage Assignments dialog box has been fixed.	FX-9269
19.0.6.0	CORR	The issue of the From Lines and To Lines not being copied properly when the Copy Deadheads feature was used in the Blocking screen has been fixed.	FX-9300
19.0.6.0	CORR	The issue of the From and To times of deadheads not updating correctly in the Blocking screen (with Implied Deadheads turned off) has been fixed.	FX-9332
19.0.6.0	CORR	The issue of the incorrect deadhead times being added when users attempt to assign garages has been fixed. Previously, when users removed the deadheads assigned to a block, and then later attempted to assign garages to the same block, if the correct deadhead times had not yet been created, the deadhead times of the next record are applied.	FX-9448
19.0.8.0	CORR	The issue of the Division assigned being changed in the Blocking screen even if another division was not assigned (that is, Assign button was not clicked) or changes in the Garages dialog box were not saved has been fixed.	FX-9608
19.0.11.0	CORR	The issue of the application being shut down when driver blocks are used with no vehicle blocks has been fixed.	FX-10184
19.0.11.0	CORR	The issue of the Pull-In and Pull-Out comments not being displayed when only one block exists in the Garage Assignment dialog box has been fixed.	FX-10166
19.0.12.0	CORR	The issue of the Block View not displaying the Line Direction information properly in the Trip Building screen has been fixed.	FX-10574
19.0.12.0	CORR	The issue of the system sometimes being unresponsive or of search results taking a long time to be generated when the In Use and Interline options are selected on the Deadheads tab of the Blocking screen has been fixed.	FX-10629
19.0.13.0	CORR	The issue of the deadhead trace, which was created freehand, of a selected deadhead not showing on the map has been fixed.	FX-9582
19.0.13.0	CORR	Improved loading time of the Blocking screen.	FX-10354
19.0.13.0	CORR	The following issues related to non-Implied deadheads when viewing blocks have been fixed: Pull-out (PO)/Pull-in (PI) deadheads were shown even if not part of the Exception Combo selected in the context. Interline deadheads were not being displayed for blocks with Exception Combos.	FX-10630
19.0.13.0	CORR	The issue of the selected garages not being assigned to blocks that have exception trips at the start or end of the block when Assign All was applied in the Garage Assignment dialog box has been fixed. (The issue occurred when non-Implied deadheads were used.)	FX-10631
19.0.13.0	CORR	The issue of an Interline deadhead that has been applied to an exception trip showing on a day without exception trips has been fixed.	FX-10819
19.0.16.0	CORR	The issue of the latest Deadhead comments not being shown after the garage assignments of blocks have been changed has been fixed. Previously, when the comments were changed on the Deadheads tab in the Blocking screen, they were saved but when users reassigned garages to the blocks, the comments were not updated.	FX-10169
19.0.16.0	CORR	Two options: a new checkbox, Update Vehicle Type and a new button, Vehicle Type From Trips have been added on the Renumber tab of the Blocking Edit dialog. If the Update Vehicle Type option is selected, the Veh Type column and the Vehicle Type From Trips button are enabled. If all the trips on the block have the same vehicle type applied to the trips, when the button is clicked, the Vehicle Type column is updated showing the same vehicle type for all trips. If the Update Vehicle Type option is not selected, the Vehicle Type From Trips button is not enabled and the vehicle types are not updated when users click Apply. The Veh Type column also becomes read-only.	FX-11117
19.0.16.0	CORR	The issue of the Times decrease across block data integrity check flagging every trip before a deadhead has been fixed.	FX-11118
19.0.16.0	CORR	The issue of garages not being assigned to trips when the pull-in deadhead follows an Interline deadhead has been fixed. (This error occurred at sites that use non-implied deadheads.)	FX-11121
19.0.16.0	CORR	The selected block on the Blocking tab now remains shown on the screen after users assign garages to trips in the Garage Assignment dialog. Previously, the tab automatically scrolled to the top of the grid after users closed the dialog.	FX-11135
19.0.16.0	CORR	The issue of a garage that has been removed from the list of garages being incorrectly assigned to the blocked trips when users clicked Assigned All in the Garage Assignment dialog has been fixed.	FX-11136
19.0.17.0	CORR	The issue of the implied deadheads in the Supplementary data grid appearing differently from the blocks on the Blocking grid has been fixed. (The color of the deadhead records on the right section of the Blocking screen now match the color of the blocks on the left section.)	FX-11391
19.0.17.0	CORR	The issue of the number of a block being changed to the next available number when users applied the Move Blocks feature has been fixed. The issue occurred when users moved the block to another line that had a block with the same Block Number. Also, a message now appears advising users that the Move Blocks feature is not available when they attempt to use it in Driver Blocks mode.	FX-11423
19.0.17.0	CORR	The issue of the scroll bar in the Garage Assignment dialog not being responsive when the selected context has a large number of blocks has been fixed.	FX-11609
19.0.17.0	CORR	The issue of Automatic Blocking inserting trips with incorrect block IDs into existing blocks when the Maintain Hooks option is selected has been fixed. (This issue only occurred when the last block on the screen was frozen.)	FX-11665
19.0.18.0	CORR	The issue of the Garage deadheads not being shown on the Deadheads tab after users selected a garage node as the From node has been fixed.	FX-11905
19.0.18.0	CORR	The issue of users being unable to rename blocks or change the vehicle type of blocks in the Blocking Edit dialog when some blocks are frozen has been fixed.	FX-12037
19.0.18.0	CORR	The loading and display issues on the Deadheads tab of the Blocking screen have been fixed.	FX-12467
19.0.18.0	CORR	The issue of trips that have been unhooked from a block, and then hooked again to a block and assigned a garage sometimes still appearing in bold type in the Blocking grid has been fixed.	FX-12755
19.0.18.0	CORR	FX now saves statistics data in the FxReportsFilesPath directory from where they are printed. Previously, the output directory for the data had not been specified. An error sometimes occurred when users attempted to print the statistics data in the Line Statistics dialog in the Trip Building screen and the Block Statistics dialog in the Blocking screen.	FX-12987
19.0.18.0	CORR	The issue of the From and To fields on the Blocking screen showing incorrect Node Abbreviations has been fixed.	FX-9263 This task is related to FX-11632.

19.0.1.0

CORR

The following issues have been fixed in the Garage Assignment dialog box:

An exception access violation error occurred when users chose Remove All and Assign All when attempting to assign garages.
An Invalid book mark warning appeared when users selected an exception combination other than Off which a trip was not assigned.

FX-8916

19.0.2.0

CORR

The issues with some garages and garage information being removed when assigning garages in the Garage Assignment dialog box have been fixed.

FX-9068

The task is related to FX-9058.

19.0.2.0

CORR

The issue of the Pull-in comments not being copied when Copy Trips was applied in the Trips screen has been fixed.

FX-9003

19.0.4.0

ENH

Two fields, Divisions and Vehicle Types have been added in the Peak Vehicle Requirements dialog box. When users open the dialog box, the option, (All) appears in both fields by default.

FX-8720

19.0.4.0

CORR

The issue of the Maintain Hooks parameter not being applied during Automatic Blocking when there was a large number of previously blocked trips in the same line group has been fixed.

FX-9093

19.0.4.0

CORR

The issue of pull-in/pull-out events being deleted from Trip times across all sign-up periods has been fixed.

FX-9171

This task is related to FX-9100.

19.0.4.0

CORR

Improved appearance of highlighted trips with more than one exception in the Blocking screen.

FX-9177

19.0.6.0

CORR

The issue of the block IDs with 9 digits not being reloaded completely has been fixed. Previously, when the blocks were exported, and then reloaded, the last digit of the block IDs were omitted.

FX-9039

19.0.6.0

CORR

The exception error that occurred after clicking the Remove All and Assign All buttons to assign garages in the Garage Assignments dialog box has been fixed.

FX-9269

19.0.6.0

CORR

The issue of the From Lines and To Lines not being copied properly when the Copy Deadheads feature was used in the Blocking screen has been fixed.

FX-9300

19.0.6.0

CORR

The issue of the From and To times of deadheads not updating correctly in the Blocking screen (with Implied Deadheads turned off) has been fixed.

FX-9332

19.0.6.0

CORR

The issue of the incorrect deadhead times being added when users attempt to assign garages has been fixed. Previously, when users removed the deadheads assigned to a block, and then later attempted to assign garages to the same block, if the correct deadhead times had not yet been created, the deadhead times of the next record are applied.

FX-9448

19.0.8.0

CORR

The issue of the Division assigned being changed in the Blocking screen even if another division was not assigned (that is, Assign button was not clicked) or changes in the Garages dialog box were not saved has been fixed.

FX-9608

19.0.11.0

CORR

The issue of the application being shut down when driver blocks are used with no vehicle blocks has been fixed.

FX-10184

19.0.11.0

CORR

The issue of the Pull-In and Pull-Out comments not being displayed when only one block exists in the Garage Assignment dialog box has been fixed.

FX-10166

19.0.12.0

CORR

The issue of the Block View not displaying the Line Direction information properly in the Trip Building screen has been fixed.

FX-10574

19.0.12.0

CORR

The issue of the system sometimes being unresponsive or of search results taking a long time to be generated when the In Use and Interline options are selected on the Deadheads tab of the Blocking screen has been fixed.

FX-10629

19.0.13.0

CORR

The issue of the deadhead trace, which was created freehand, of a selected deadhead not showing on the map has been fixed.

FX-9582

19.0.13.0

CORR

Improved loading time of the Blocking screen.

FX-10354

19.0.13.0

CORR

The following issues related to non-Implied deadheads when viewing blocks have been fixed:

Pull-out (PO)/Pull-in (PI) deadheads were shown even if not part of the Exception Combo selected in the context.
Interline deadheads were not being displayed for blocks with Exception Combos.

FX-10630

19.0.13.0

CORR

The issue of the selected garages not being assigned to blocks that have exception trips at the start or end of the block when Assign All was applied in the Garage Assignment dialog box has been fixed. (The issue occurred when non-Implied deadheads were used.)

FX-10631

19.0.13.0

CORR

The issue of an Interline deadhead that has been applied to an exception trip showing on a day without exception trips has been fixed.

FX-10819

19.0.16.0

CORR

The issue of the latest Deadhead comments not being shown after the garage assignments of blocks have been changed has been fixed. Previously, when the comments were changed on the Deadheads tab in the Blocking screen, they were saved but when users reassigned garages to the blocks, the comments were not updated.

FX-10169

19.0.16.0

CORR

Two options: a new checkbox, Update Vehicle Type and a new button, Vehicle Type From Trips have been added on the Renumber tab of the Blocking Edit dialog. If the Update Vehicle Type option is selected, the Veh Type column and the Vehicle Type From Trips button are enabled. If all the trips on the block have the same vehicle type applied to the trips, when the button is clicked, the Vehicle Type column is updated showing the same vehicle type for all trips. If the Update Vehicle Type option is not selected, the Vehicle Type From Trips button is not enabled and the vehicle types are not updated when users click Apply. The Veh Type column also becomes read-only.

FX-11117

19.0.16.0

CORR

The issue of the Times decrease across block data integrity check flagging every trip before a deadhead has been fixed.

FX-11118

19.0.16.0

CORR

The issue of garages not being assigned to trips when the pull-in deadhead follows an Interline deadhead has been fixed. (This error occurred at sites that use non-implied deadheads.)

FX-11121

19.0.16.0

CORR

The selected block on the Blocking tab now remains shown on the screen after users assign garages to trips in the Garage Assignment dialog. Previously, the tab automatically scrolled to the top of the grid after users closed the dialog.

FX-11135

19.0.16.0

CORR

The issue of a garage that has been removed from the list of garages being incorrectly assigned to the blocked trips when users clicked Assigned All in the Garage Assignment dialog has been fixed.

FX-11136

19.0.17.0

CORR

The issue of the implied deadheads in the Supplementary data grid appearing differently from the blocks on the Blocking grid has been fixed. (The color of the deadhead records on the right section of the Blocking screen now match the color of the blocks on the left section.)

FX-11391

19.0.17.0

CORR

The issue of the number of a block being changed to the next available number when users applied the Move Blocks feature has been fixed. The issue occurred when users moved the block to another line that had a block with the same Block Number. Also, a message now appears advising users that the Move Blocks feature is not available when they attempt to use it in Driver Blocks mode.

FX-11423

19.0.17.0

CORR

The issue of the scroll bar in the Garage Assignment dialog not being responsive when the selected context has a large number of blocks has been fixed.

FX-11609

19.0.17.0

CORR

The issue of Automatic Blocking inserting trips with incorrect block IDs into existing blocks when the Maintain Hooks option is selected has been fixed. (This issue only occurred when the last block on the screen was frozen.)

FX-11665

19.0.18.0

CORR

The issue of the Garage deadheads not being shown on the Deadheads tab after users selected a garage node as the From node has been fixed.

FX-11905

19.0.18.0

CORR

The issue of users being unable to rename blocks or change the vehicle type of blocks in the Blocking Edit dialog when some blocks are frozen has been fixed.

FX-12037

19.0.18.0

CORR

The loading and display issues on the Deadheads tab of the Blocking screen have been fixed.

FX-12467

19.0.18.0

CORR

The issue of trips that have been unhooked from a block, and then hooked again to a block and assigned a garage sometimes still appearing in bold type in the Blocking grid has been fixed.

FX-12755

19.0.18.0

CORR

FX now saves statistics data in the FxReportsFilesPath directory from where they are printed. Previously, the output directory for the data had not been specified. An error sometimes occurred when users attempted to print the statistics data in the Line Statistics dialog in the Trip Building screen and the Block Statistics dialog in the Blocking screen.

FX-12987

19.0.18.0

CORR

The issue of the From and To fields on the Blocking screen showing incorrect Node Abbreviations has been fixed.

FX-9263

This task is related to FX-11632.