Windows XP Embedded Requirements

The following requirements are needed to support XP Embedded with MDC:

Table 1. Windows XP Embedded Specifications

Minimum Requirements	Recommended
System Memory: One 200-pin SODIMM socket, accepts up to 1 GB DDR266/333 SDRAM	System Memory: One 200-pin SODIMM socket, accepts up to 1 GB DDR266/333 SDRAM
Operating System: XP Embedded	Operating System: XP Embedded
SSD: 1 x type ll CompactFlash socket	SSD: 1 x type ll CompactFlash socket
Bus Expansion: 1 x MiniPCI expansion slot	Bus Expansion: 1 x MiniPCI expansion slot
LAN: 10/100Base-T Ethernet	LAN: 10/100Base-T Ethernet
Audio: Built-in 1 x 1.5w speaker; 1 x hidden microphone	Audio: Built-in 1 x 1.5w speaker; 1 x hidden microphone
Function keys: 5 lighted, programmable function keys	Function keys: 5 lighted, programmable function keys
GPS: Integrated 12 channel GPS receiver	GPS : Integrated 12 channel GPS receiver
Bluetooth: One Class 2 Bluetooth V2.0 + EDR module	Bluetooth: One Class 2 Bluetooth V2.0 + EDR module
CAN bus: RS-232 baud rate up to 115.2K bps	CAN bus: RS-232 baud rate up to 115.2K bps
Protection: IP65 front panel and back cover protection, without ventilation holes	Protection: IP65 front panel and back cover protection, without ventilation holes
Weight: 1.7 kg (3.75lb)	Weight1.7 kg (3.75lb)
	GPRS (Optional): Quad-band 900/1800/850/1900 MHz GSM/GPRS modem
	WLAN (Optional): IEEE802.11b/g
Power Supply Input Voltage: 9 ~ 36 VDC Minimum Input Voltage: 6 VDC, supports ignition cold crank, Low battery shut-down protection threshold (optional) Ignition on/off: Power on delay, default 2 seconds Power off delay, default 5 seconds Hardware power off delay, default 2 seconds	Power Supply Input Voltage: 9 ~ 36 VDC Minimum Input Voltage: 6 VDC, supports ignition cold crank, Low battery shut-down protection threshold (optional) Ignition on/off Power on delay, default 2 seconds Power off delay, default 5 seconds Hardware power off delay, default 2 seconds
Graphics Display type: 7" color TFT LCD, LED backlight Luminance: 400 cd/m2 Max. Resolution: Wide-VGA 800 x 480, 5% ~ 100% brightness controlled by H/W buttons	Graphics Display type: 7" color TFT LCD, LED backlight Luminance400 cd/m2 Max. Resolution: Wide-VGA 800 x 480, 5% ~ 100% brightness controlled by H/W buttons
Touchscreen Type: Analog resistive, continuous resolution Light Transmission: 80% Controller: RS-232 interface (COM3) Power Consumption: <5.5 V @ 20 mA Software Driver: Supports Windows XP/XP Embedded, WinCE, Linux	Touchscreen Type: Analog resistive, continuous resolution Light Transmission: 80% Controller: RS-232 interface (COM3) Power Consumption: <5.5 V @ 20 mA Software Driver: Supports Windows XP/XP Embedded, WinCE, Linux
Environmental Specifications Operating Temperature: -20 ~ 60° C (-4 ~ 140° F) Relative Humidity: 10 ~ 95% @ 40° C (non-condensing) Shock: 30 G peak acceleration (11 msec. duration) Certifications: EMC: CE, FCC.CCC Safety: UL, CUL, CE; CCC, CB Vibration: 5 ~ 500 Hz 4.5G RMS random vibration	Environmental Specifications Operating Temperature: -20 ~ 60° C (-4 ~ 140° F) Relative Humidity: 10 ~ 95% @ 40° C (non-condensing) Relative Humidity: 10 ~ 95% @ 40° C (non-condensing) Shock: 30 G peak acceleration (11 msec. duration) Certifications: EMC: CE, FCC.CCC Safety: UL, CUL, CE; CCC, CB Vibration: 5 ~ 500 Hz 4.5G RMS random vibration