PASS

PASS is an advanced scheduling and dispatching application developed to support the coordinated transportation efforts of demand response transit services.

PASS release note tables have been divided by category for easy reference to the software.

PASS tasks may be found in TP4 release notes or in TP6 release notes.

Trapeze4 Workstation

The Trapeze4 Workstation is the Trapeze interface most commonly used by PASS.

This section contains general corrections and enhancements that relate to PASS within the Trapeze4 Workstation.
Version Type Description ID
TP4

19.4.0.0

 CORR In the Trapeze4 workstation, you can now use the same email address for more than one client. PASS-19306
TP4 19.2.0.0 CORR Fixed a run-time error caused when creating and saving a client alert. No client alert messages appeared. Error appeared in Trapeze4 CDBlog and in workstation pop-up message. PASS-20686
TP4

19.2.0.0

 CORR In User Properties, setting the phone number format now applies to the following fields and screens:

Workstation screens

  • Employees (Phone field, Emergency Phone field, and Mobile Phone field)
  • Locations (Phone field)
  • Garages (Phone field)
  • Providers (Phone field and Enquiry Phone field)
  • Vehicles (Phone field)
  • Quick Booking (Phone field)
  • Location Program (Phone field)
  • Address Maintenance (Phone field)
  • Booking Wizard (Pickup and Dropoff Phone fields)
  • Contact Category (Phone field)
  • Client Information (Emergency Phone field, Phone field, Booking Address Phone fields)
  • Find Clients (Phone field)
  • Find Employees (Phone field, Home Phone field)
  • Find Locations (Phone field)
  • Find Stops (Phone field)

CERT screens

  • Employees (Phone field, Emergency Phone field, and Mobile Phone field)
  • Locations (Phone field)
  • Clients (Phone field, Emergency Phone field)
  • Contact Category (Phone field)
  • Contact Information Control (Changed to match Workstation logic of formatting)
  • Client Information (Emergency Phone field, Phone field, Booking Address Phone fields)
  • Find Clients (Phone field)
  • Find Employees (Phone field, Home Phone field)
  • Find Locations (Phone field)
  • Find Stops (Phone field)
 PASS-19685
TP4

19.4.0.0

 CORR Fixed an issue where the Tracker Action log filter changed to EventId without any interaction. PASS-21023
TP4

19.4.0.0

 CORR Fixed an issue where disabling Auto refresh system property still refreshed data from Schedule Editor. PASS-21007
TP4

19.4.0.0

 CORR Fixed an issue where phone number disappeared from Client and General tab in the Trapeze 4 workstation. PASS-20950
TP4

19.4.0.0

 CORR Fixed an issue where Max OBT Factors displayed out of order when using Oracle. PASS-20920
TP4

19.4.0.0

 CORR Fixed an issue where Depends-On Logic did not check FareType. Depends-On logic for a FareType setup was based on Negotiated Time for Pickup. As booking is not recalculated at scheduled time, the Negotiated Time was removed from the Depends on Logic. PASS-20824
TP4

19.4.0.0

 CORR Fixed an EXCEPTION_ACCESS_VIOLATION error that was discovered in a cloud environment. This occurred when exiting out of the Trapeze 4 workstation. PASS-20063
TP4 19.6.0.0 CORR Fixed an issue in the Trapeze 4 workstation, where doing zoom-ins, zoom-outs and full views on the map multiple times will freeze the workstation. PASS-18870
TP4

19.7.0.0

 CORR Fixed an issue, where security key, PASS-OPS Integration/Override Vehicle Inactive Status was not granted, but user was not able to search for employees in the Vehicle Assignment screen. PASS-21493
TP4

19.7.0.0

 CORR Fixed an issue where Trapeze4 Workstation was hanging when a database connection was lost during booking activation. PASS-21475
TP4 19.7.0.0

 ENH Fixed an issue in the Trapeze 4 workstation. When Services address (System Properties > Services) was different from the Publish Event address (System Properties > PASS Scheduling), Publish Event address did not receive events. PASS-21633
TP4 19.9.0.0 CORR Fixed a issue, where Trapeze 4 workstation crashed when attempting to access map.bin on a network drive. PASS-21756
TP4 19.9.0.0 CORR Fixed an issue in Client/Booking info dialog, where you are not able to select the phone number in contact info in order to copy the phone number. The phone number is greyed out. PASS-21476
TP4 19.9.0.0 CORR Fixed an issue, where supplementary data fields added to daily runs did not load. PASS-21855
TP4 19.9.0.0 CORR Fixed an issue in the Client/Booking Info screen, where Suspend field did not show dates and Exclamation icon does not appear beside it. PASS-21983
TP4 19.9.0.0 CORR Fixed an issue in workstation, where user account was locked out after a password reset. PASS-22056
TP4 19.9.0.0 CORR Fixed an issue, where exception error was thrown. Exception error happened when clicking on Tracker Action Browser from Trip Admin and Schedule Editor, then closing Schedule Editor. PASS-22231
TP4 19.9.0.0 CORR Fixed a Client Alert issue, where if Alert was closed for 1 client, it changed the closed status to YES for other clients. PASS-22302
TP4 19.9.0.0 ENH Maximum Client Bookings feature was improved so that it limits the amount of bookings based on paraservice type. PASS-21884
TP4 19.9.0.0 ENH Fixed an issue where the exclamation mark next to the Suspended From field in the Client/Booking Info screen did not appear. PASS-22314
TP4 19.9.0.0 CORR Fixed an issue where a provider job agent job was cancelling other provider bookings. PASS-22304
TP4 19.9.0.0 CORR Fixed an issue where when a period pass import job was run, BookingAgentId was not populated in the Usage Report. PASS-22428
TP4 19.9.0.0 CORR Fixed an issue with Sched Multi Parameter where a parameter set was not used when multiple bookings were selected. PASS-22262
TP4 19.9.0.0 CORR Fixed an issue where Batch Job Agent could not be authenticated. PASS-22321
TP4 19.9.0.0 CORR Fixed an issue in workstation, where if Password Age and Password Age warnings were used in a transit site setup, then a password could not be reset. PASS-22436
TP4 19.10.0.0 CORR Fixed an issue where when Employee record was modified in Trapeze4 workstation, key OPS information was being deleted from the EmployeeStatus table. PASS-22499
TP4 19.10.0.0 CORR Fixed an issue where street labels did not show in the map when enabled. PASS-22371
TP4 19.10.0.0 CORR Fixed an issue where nak text messages could not be sent to vehicles. PASS-22485
TP4

19.12.0.0

 CORR Fixed an issue where an access violation was caused when a trip was dragged and dropped to a taxi run. PASS-22782
TP4 19.11.0.0 CORR Fixed an issue where the custom grid icon was greyed out on the Vehicles screen. PASS-22372
TP4

19.12.0.0

 CORR Fixed an issue where batching did not consider the solution parameter with a value entered in the Restrict First Pickup Window field. PASS-22362
TP4 19.11.0.0 CORR Fixed an issue where incorrect data was displayed when more than one Real Time Views was configured with different filters. PASS-22689
TP4 19.12.0.0 CORR Fixed an issue where a SmartCards update job (only updates the smartcardid in bookings) was changing the smartcardid in Clients when running on consecutive days. When it ran again on the next day, the smartcardid in Clients changed. Now, a DaysOffset field was added. When set to 0, the SmartCards update job will only update smartcardid in bookings and not in Clients. PASS-22505
TP4 19.13.0.0 CORR The following improvements were added to allow rescheduling bookings with DropOff reqtime by Batch or Schedule Booking Wizard:
  • Tools/System Properties/Profile/PASS/Scheduling/Tolerance - Apply to Pickup without Requested Time. YES is set by default, and setting NO produces the behavior.
  • Added new job type in Schedule Job Agent: Update Client Event Times from Estimated.
PASS-22805
TP4 19.14.0.0 CORR Fixed an issue where when one screen was pinned, it caused subsequent screens that were opened to become pinned. PASS-23004
TP4 19.16.0.0 CORR Fixed an issue where when one screen was pinned, it caused subsequent screens that were opened to become pinned. PASS-23004
TP4 19.16.0.0 CORR

Fixed an issue where the following alert pop-up: Vehicle Type does not match that of assigned vehicle for runs. The vehicle’s VehicleType will be used appeared in the Run Change Wizard. However, when runs were changed manually, alert pop-up did not appear.

 PASS-22961
TP4 19.16.0.0 CORR Fixed an issue where Job Agent batches were changing the SchTime on trips. PASS-22590
TP4 19.19.0.0 CORR

Fixed an issue where PASS workstation was freezing.

 PASS-23560
TP4 19.19.0.0 CORR

Fixed an issue where searching for client middle names in Find Clients did not produce results.

 PASS-23550
TP4 19.19.0.0 CORR

Fixed an issue where when creating new ParaService Area Rules, the Applies to: dropdown menu displayed PASS WEB twice instead of PASS WEB and PASS Workstation.

 PASS-23535
TP4 19.19.0.0 ENH

Added a new user property: Show Driver Badge Number Only. When set to Yes, only the driver’s badge number is displayed in Schedule Editor. When set to No, only the driver’s name is displayed in Schedule Editor.

 PASS-23514
TP4 19.19.0.0 CORR

Fixed an issue where the Employee ID value was not auto populating in PASS COM when feedback was being submitted from Add Feedback.

 PASS-23464

Switches

Switches turn specific system functionality on and off, or modify how the system functionality works.

Switches are found in different places in the system. For example, in the Trapeze6 Service Shell in and in the Trapeze4 Workstation. Typically, when a switch is seen in multiple locations, its settings should match in all places.
Version Type Description ID
TP4 19.8.0.0 CORR Fixed an issue, where the map defaults to a 0 latitude and 0 longitude when first opening the Trapeze 4 workstation. Map can be reset to full view by clicking on the eyeglasses icon, but the map does not save the last view when the workstation is closed and re-opened. PASS-21714
TP4 19.19.0.0 ENH

Implemented SQL pagination. Added switches to control behavior:

PASS/TripAdmin/SQL Pagination/Bookings per Page

Controls number of booking to select per page. 0 reverts to old behaviour.

PASS/TripAdmin/SQL Pagination/Enable Progress Indication on Page Select

Enables progress indication during query execution while selecting records of subsequent pages during grid scrolling and refreshing with restoration of current scroll position. Enabled by default. Can be disabled for troubleshooting and workaround of potential issues. Progress indication can lead to recursive calls due to usage of VB6 DoEvents method)

 PASS-23413

Security Permissions

Security permissions define features within PASS to which users can either be given access or denied access.

Security permissions are found in the Trapeze6 Client Shell and in web-based interfaces.
Version Type Description ID
TP4 19.8.0.0 CORR Fixed an issue, where you could not book trips with SmartCard ID. The following error message was displayed, "SmartCard validation...cannot connect to SrvShell." Security permission: PASS/PassInfoServer/Public Methods is no longer required for smart card validation. PASS-21848

System Properties

Trapeze4 system properties define certain aspects of system behavior.

System properties are found in the Trapeze4 Workstation under Tools > System Properties.

Version Type Description ID
TP4

19.2.0.0

 CORR Fixed an issue that was causing the system property, Enable Prepaid Faring Deductions when set to Prepayment From Purse to not load. System property issue prevented faring to not be automatically deducted from the passenger account. PASS-20581
TP4 19.2.0.0 ENH A new system property, Booking Activate: check client eligibility dates has been added.

When the system property is enabled, it will check the para service rule for an activated subscription booking. If the para service rule check fails, a booking will not be generated for that date/day.

 PASS-19700
TP4 19.15.0.0 CORR Fixed an issue where when Tools > System Properties > Enforce Capital Letters was set to Yes would only work intermittently. PASS-22834

Ancillary Data and Supplementary Data

Ancillary data allows transit sites to customize the information system users see when they work in the Trapeze4 Workstation. Supplementary data provides additional opportunities for customization.

Version Type Description ID
TP4

19.4.0.0

 ENH Moved ParaRunCategories ancillary data from Trapeze5 to Trapeze4. PASS-19395
TP4 19.4.0.0 CORR A new Progressive Fare Distance option was added to File > Ancillary Data > Para > Pricing > Fare Types. When Progressive Fare Distance is enabled, fare calculations will be based on settings provided from the Fare Distance dialog.
The following example shows how it works. You can provide the following settings in the Fare Distance dialog:
  • 16 miles will cost $6
  • $6.00 base fare plus $1.00 per mile at or beyond the 16-mile mark.
You can then enable the Progressive Fare Distance option to calculate the fare.		 PASS-20650
TP4 19.9.0.0 CORR Fixed an issue, where removing a polygon type from the Polygon Types ancillary data did not remove values from the polygon attribute tables. PASS-20841
TP4 19.9.0.0 CORR Fixed an issue where COM ancillary data did not appear in some of the dropdown fields for the Complaints dialog box. PASS-22219
TP4 19.9.0.0 CORR Fixed an issue in Travel Exclusion Rules ancillary data, where a new rule that was created could not be deleted. PASS-22251
TP4 19.9.0.0 CORR Fixed an issue where violations were not updated when Vehicle Type Exclusions were updated in an existing booking. PASS-22341

Runs

Runs allows users to define master, template, and daily runs to which trips may be scheduled.

Runs is found in the Trapeze4 Workstation by clicking Task > Runs.

Client Registration

Client Registration allows you to register clients, update client history, and define a client’s eligibility for paratransit service.

Client Registration is found in the Trapeze4 Workstation by clicking Task > Clients.

Version Type Description ID
TP4

19.1.0.0

 CORR Fixed an issue where a booking was not saved because a client was not added. Now, a booking can be saved without a Client added. PASS-18192
TP4

19.1.0.0

 CORR Fixed an issue in the Clients screen, where the client's age was incorrectly calculated from the DOB: field. When you select the calendar to correct it, the age changes to a negative number. PASS-18123
TP4

19.1.0.0

 CORR Fixed an issue in Client Registration, General tab where a phone number entered in the Phone: text box did not display in the correct format (with parentheses or dashes) in the Select tab grid. PASS-18059
TP4 19.3.0.0 CORR Fixed an issue where comments were deleted in the Details tab of the Clients screen when an address was being updated. PASS-20627
TP4 19.4.0.0 CORR Fixed an issue in the eligibility tab of the Client's screen, the selected conditions for a client do not appear. PASS-20714
TP4

19.7.0.0

 CORR Fixed an issue in Client/Booking info dialog, where you were unable to copy a phone number in the contact info. The phone number was greyed out. PASS-21476
TP4

19.12.0.0

 CORR Fixed an issue where clicking the Select button, in the pictures tab of the Clients screen caused the workstation to crash. PASS-22740
TP4 19.13.0.0 CORR Fixed an issue where adding a common location by street number in Client registration did not pull the location's details such as ID, comments, etc. PASS-22690
TP4 19.15.0.0 CORR Fixed an issue where Vehicle Type Exclusions associated with a home address were removed after a booking was saved. PASS-23137
TP4 19.16.0.0 CORR Fixed an issue where the Client/Booking Info dialog box was filtering out alpha-numeric characters when handling phone numbers. It appeared differently on the Clients screen. PASS-22653
TP4 19.16.0.0 CORR Fixed an issue where Emergency phone number could not be selected in the Client / Booking Info dialog box. The field was greyed out. PASS-22421
TP4 19.19.0.0 CORR

Fixed an issue where the Client screen did not open and an exception error occurred.

 PASS-23558
TP4 19.19.0.0 CORR

In PASS (Trapeze4 Workstation), The gender field was updated in the Client Registration Screen to allow more gender options.

 PASS-23555
TP4 19.19.0.0 CORR

Fixed an issue in Client Registration where the ParaServices dropdown list did not set to the same value set in the Certification on the Fly system property.

 PASS-23545

Trip Booking

Trip Booking allows users to create casual or subscription trips for clients.

Trip Booking is found in the Trapeze4 Workstation by clicking Task > Trip Booking.
Version Type Description ID
TP4 19.2.0.0 CORR Fixed an issue that was caused when saving a booking for multiple days. An error message appeared in the workstation. PASS-20708
TP4 19.2.0.0 CORR Fixed an issue when creating and activating a subscription booking. Error appeared in Trapeze4 CDBlog. PASS-20682
TP4

19.2.0.0

 CORR Fixed an issue where there was no alert pop-up that notified when booking a trip for multiple days that already had an existing booking. This occurred specifically when date offset was enabled but the booking was changed to multiple dates using the calendar. PASS-20528
TP4 19.3.0.0 CORR Fixed an issue where the IVR Notifications drop-down box was cleared when a booking was copied and pasted. PASS-20585
TP4 19.5.0.0

CORR Fixed an issue in Trip Booking, where when you created a new booking or loaded an existing one, pressing F6 did not load client information. PASS-21167
TP4

19.7.0.0

 CORR Fixed an issue in Trip Booking, where fare calculation logic caused subscription bookings to show incorrect fares. PASS-21002
TP4 19.8.0.0 CORR Fixed an issue, where when creating a booking for multiple days, and then returning back to the booking to edit something that affects scheduling (for example, Providers), the neg time was changed for all bookings to the first neg time on the list. PASS-21794
TP4 19.9.0.0 CORR Fixed an issue, where the date changed after midnight when attempting to cancel a booking with a prior date (a late cancel.) There was no pop-up stating that the booking was a late cancel. PASS-21745
TP4 19.8.0.0 CORR Fixed an issue where LT times were not generated after bookings were saved. PASS-18941
TP4 19.9.0.0 CORR Fixed an issue, where the LT time for a drop-off disappeared for a saved booking with Req drop-off checkbox selected. PASS-21905
TP4 19.9.0.0 CORR Fixed an issue, where clients that were added to a group booking were not saved. Only one client showed in the group booking. PASS-22345
TP4

19.12.0.0

 CORR The following are two new warning prompts added to the workstation:
  1. "Trip was cancelled, the solution was out of date an can not be saved" appears when you attempt to select an out of date solution in Schedule Booking Wizard.
  2. "Your Selection contains (1) cancelled booking(s) which will not be loaded" appears when you have not uncancelled a trip in Trip Admin, and attempt to schedule a cancelled trip.
 PASS-22753
TP4

19.12.0.0

 CORR Fixed an issue where navigating from another screen to Trip Booking and making no changes will still show the "Save changes before exiting?" prompt. PASS-22746
TP4 19.14.0.0 CORR Fixed an issue where Call-back Status field in Trip Booking did not update. Field should display Sent instead of Unsent. PASS-23067
TP4 19.14.0.0 CORR Fixed an issue where the formatting and defaults applied to Booking Supplementary Data fields were not reflected as the same in the Schedule Editor > No-Show dialog screens. PASS-22769
TP4 19.16.0.0 CORR Fixed an issue where saving a booking in Trapeze4 workstation took excessive time. This typically occurred after confirming the service area in the booking process. PASS-23297
TP4 19.16.0.0 CORR Fixed an issue where when saving booking using ReqDO logic, LT time for drop off would disappear. PASS-23314
TP4 19.16.0.0 CORR Fixed an issue that caused Vehicle Type Exclusions to still appear on a booking even though they were previously removed from an address. PASS-23258
TP4 19.16.0.0 CORR Fixed an issue where when DO (drop-off) logic was enabled, it did not apply to a booking. PASS-22519

Faring

Faring is about how clients are charged for trips.

Fare type options are defined in ancillary data under File > Ancillary Data > Para > Pricing > Fare Types. Faring is used throughout PASS and fare types are seen in various places, including Client Registration, Trip Booking, and Schedule Editor.

Trip Administration

Trip Administration allows users to look up trip information and to maintain and update subscription and casual bookings.

Trip Administration is found in the Trapeze4 Workstation by clicking Task > Trip Administration.

Version Type Description ID
TP4

19.2.0.0

 ENH New search filters are now implemented in Trip Administration to enhance Mass Notifications. The current filters that search through trips in Mass Notifications are expanded to meet the potential needs during emergencies and other situations where the Mass Notifications feature would be utilized.
The following search filters are added:
  • Booking SubType - Ability to choose/filter trips by a single or multiple selected Booking Subtypes.
  • Trip Purpose - Ability to choose/filter trips by a single or multiple selected Trip Purpose(s).
  • Funding Source - Ability to choose/filter trips by a single or multiple selected Funding Source(s).
  • Zip Code - Ability to choose/filter trips by a single or multiple selected Zip Code(s).
  • City - Ability to choose/filter trips by a single or multiple selected Cities.
  • Polygon - Ability to choose/filter trips by a single or multiple selected Polygon Types and/or Polygons.
  • Common Location - Ability to choose/filter trips by a single or multiple selected Common Locations.
  • Schedule Status - Ability to choose/filter trips by a single or multiple selected Schedule Status codes, especially cancellations.
In addition, new Context Properties are added:
  • PASS > PassInfoServer > IVR > MassNotification Server > Host Address
  • PASS > PassInfoServer > IVR > MassNotification Server > IP Port
 PASS-20522
TP4 19.2.0.0 ENH

You can now select which type of time that you want to search for in Trip Administration, now a toggle option for ReqTime, SchTime, and NegTime has been added.

 PASS-19174
TP4

19.4.0.0

 CORR Fixed performance issues that caused the workstation to intermittently hang or freeze during the following operations:
  • When running the workstation on Schedule Server, and logged in with a provider user account. This only affects certain provider accounts. Users with access to all runs do not experience this problem.
  • When logged in using an "all access" admin account.
 PASS-20923
TP4

19.4.0.0

 CORR Fixed a drag and drop issue in Trip Admin. When dragging rides to a Schedule Editor manifest, the error message, "Cannot drag & drop between different days!" appeared despite rides being on the same day. PASS-19386
TP4 19.5.0.0 CORR Fixed a column sorting issue in Trip Administration. When clicking columns such as, Req and Neg, times were not sorted correctly. PASS-21175
TP4 19.5.0.0

CORR Fixed an issue in Trip Admin, where VTE filter was not filtering correctly. PASS-20033
TP4

19.7.0.0

 CORR Fixed an issue that caused trips to not appear in Trip Administration when searching with FROM DATE and TO DATE filters. When looking for a trip with the current date, if you set the FROM DATE to today and TO DATE to blank, the trip will not appear. PASS-21472
TP4 19.7.0.0 CORR Fixed an issue where only one polygon option was available in the Polygon filter, in Trip Administration. PASS-21372
TP4 19.8.0.0 CORR Fixed the following issues in the Trip Admin screen:
  • Clicking Display > See Logs throws an error in the Log.
  • When clicking Display > See Row, at bottom of Display List, the Row count was not displaying the complete record count. It was just displaying the counter position such as, 1/0 , 2/0 , 12/0 etc.
 PASS-21815
TP4 19.9.0.0 CORR Fixed an issue in Trip Admin where when searching pick up/drop offs by location and enabling Toggle Search Type to On, search results did not show accurate number of clients. PASS-22357
TP4

19.12.0.0

 CORR Fixed an issue where a warning pop-up did not appear when a new booking was created for a suspended client. Pop-up should have warned of the new booking falling within the suspended date range. PASS-22484
TP4 19.12.0.0 CORR In Trip Admin, you can now sort by booking id by clicking BookingId column header in the grid. PASS-22790
TP4 19.14.0.0 CORR Fixed an issue where the "paste" action when copying and pasting trips either within Trip Admin or from Trip Admin to Schedule Editor was not tracked in the Tracker Action Log. PASS-23001
TP4 19.16.0.0 CORR Fixed an issue where background colors were not consistent for locked and frozen events in Trip Admin and Schedule Editor. PASS-23274
TP4 19.19.0.0 CORR

Fixed an issue where MobAids and Disability show a value in Trip Admin when they are actually NULL in Trip Booking.

 PASS-23589
TP4 19.19.0.0 CORR

Fixed an issue where DO (drop-off) filter did not work in Trip Admin.

 PASS-23454

Schedule Administrator

Schedule Administrator is an application used by system administrators to for preliminary schedule work. For example, defining schedule types, adding schedules, and loading schedules.

Schedule Administrator (SAdm41.exe) is typically found in the same folder as the Trapeze4 Workstation (Mmsw41.exe).
Version Type Description ID
TP4 19.8.0.0 ENH You can now reset the Schedule Server from the Schedule Administrator application. There is now a Schedule/Reload All menu button.

The reset will attempt to stop all the threads that may access schedules, unload all schedule objects, and reload schedules defined in the schedule load list.

During the reset, all scheduling requests are disabled and will return a error. If all schedules are successfully unloaded, then static data will be reloaded and a message: "Static data loaded" will appear in the Schedule Server log.		 PASS-20758

Schedule Editor

Schedule Editor is a powerful tool used to access trip information and make schedule changes.

Schedule Editor is found in the Trapeze4 Workstation by clicking Tools > Schedule Editor.

Version Type Description ID
TP4

19.1.0.0

 CORR Fixed an issue, where a late pick-up event marked with the Schedule Status Code: NT (Missed Trip but Transported) was treated as already performed. This prevented the driver from performing the pickup on their system and prevented the Dispatcher from performing the event in the Schedule Editor. Now, if a Dispatcher marks the pickup NT, the pick-up will disappear from the manifest, but the driver can still perform the drop-off on their system. Also, in Schedule Editor, the Dispatcher should receive a message saying, "Trip cancelled or removed by dispatch." PASS-18090
TP4

19.4.0.0

 CORR Fixed an issue that caused ghost events to be displayed in the Schedule Editor - Unscheduled Events. PASS-19614
TP4 19.6.0.0

 CORR Fixed an issue in Schedule Editor when running Run Graphical Analysis Wizard. While scrolling through the graph, at a random point during scrolling, there was an error thrown and produced the following message: Assert(NotNull) Failed. (<) Attempt to compare null Tims Cls: AssertException PASS-21373
TP4 19.6.0.0 CORR Fixed an issue in Schedule Editor, where occasionally the cursor jumped to another box and the slider bar moved when clicking a box on the grid. PASS-21371
TP4

19.7.0.0

 CORR Fixed an issue in Schedule Editor, where if you add an actual arrive and/or actual depart time to an event on a future day, the event can be performed for the future day. There is no way to undo this through the user interface, a user must delete the event and recreate it, or wait until the day of and un-perform the event. A fix was made to prevent a user from performing a future day's event. PASS-21508
TP4

19.7.0.0

 CORR Fixed an issue, where working with a particular non-ADA service, there was repeated crashing while dragging and dropping trips in schedule editor. The workstation closed and you have to log in again. PASS-21510
TP4 19.7.0.0 CORR Fixed an issue in Schedule Editor, where codriver column from the run itinerary view was showing Yes instead of No, even though a run has a co-driver. PASS-20116
TP4 19.7.0.0

 CORR Fixed a slow loading issue in Schedule Editor when no schedules were loaded. PASS-21366
TP4 19.8.0.0 CORR Fixed an issue, where Run Itinerary View colors were inconsistent. It did not follow the same color scheme as the Schedule Editor. PASS-21643
TP4 19.8.0.0 CORR Fixed an issue, where Schedule Editor's run graphical view did not continuously refresh. PASS-21874
TP4 19.9.0.0 CORR Fixed an issue where workstation crashed with a runtime error when trips were dragged and dropped in Schedule Editor. PASS-22258
TP4 19.9.0.0 CORR Fixed an issue in the Schedule Editor, where trips were not sorted correctly in unscheduled trips view. PASS-22291
TP4

19.12.0.0

 CORR Fixed an issue where a location name in Trip Booking did not match the location name in Schedule Editor. PASS-22027
TP4 19.14.0.0 CORR Fixed an issue where client codes did not display in the Schedule Editor. PASS-23076
TP4 19.16.0.0 CORR Fixed an issue in Schedule Editor where Find function and then selecting run, and Search Run did not autofill a run search correctly when a unique run number was entered, for example, 319R. When entering a partial run number to begin the search, the autofill pulls in additional data instead of the run number. PASS-23314
TP4 19.17.0.0 CORR Fixed an issue where schedules with large Revenue Run Distance (in Schedules view) would not load. PASS-23321
TP4 19.19.0.0 CORR

Fixed an issue in Schedule Editor where time fields could only be edited by highlighting a cell and typing a value. Time fields could not be edited by mouse clicking.

 PASS-23551
TP4 19.19.0.0 CORR

Fixed an issue where there was confusion with the FareToCollect Column in the Run Itinerary view of Schedule Editor when the faring algorithm resets FareToCollect to FareCollected. Now, a FareDeducted column is added to the Run Itinerary view. FareDeducted is stored at the booking record level.

 PASS-23331

Schedule Server

Schedule Server is an application that performs scheduling functions for PASS. For example, matching template trips to live schedule trips, devising estimated trip times, creating run itineraries, and calculating provider costs.
Version Type Description ID
TP4

19.1.0.0

 CORR
Fixed an issue where AVL Break still remained on a run, which added extra service hours to the reporting. Now, changes have been implemented to remove AVL Break in the following:
  • Schedule Server will remove it when the pull-in event is performed.
  • MDT Server will remove it when the driver logs off (will be re-inserted if the driver logged off accidentally and logs back in).
  • After the incident threshold has been reached ( Threshold set in Trace Options > Switches > PASS > Mdt Srv > AVL > Break Removal Threshold).
  • MDT Server will remove it at the end of the day (Set in System Properties > System > End time of the day).
 PASS-18116
TP4

19.7.0.0

 CORR Fixed an issue in Schedule Server, where you could not load random past schedules. PASS-21509
TP4 19.8.0.0 CORR Fixed a schedule server issue, where several trips were not activated when fare cannot be calculated. PASS-21607
TP4 19.9.0.0 CORR Fixed an issue, where the PASS system ignored MAXOBT when using Service Based Scheduling. The system provided scheduling solutions that violated MaxOBT, but did not indicate that violations had occurred. This issue will occur if ParaserviceId is not provided, therefore using Service Based Scheduling. PASS-21908
TP4 19.9.0.0 CORR Fixed an issue, where when Schedule Server switch: PASS > SchedSrv > SchedWiz > Enable Search on Drag and drop was turned ON but no suitable solution was found, the drop-off was placed at the end of the run instead of immediately after pickup. PASS-21685

Wizards

Wizards are typically used to locate information or update records and are accessed from various PASS screens (for example, Client Registration, Trip Booking, or Trip Administration).

Wizards include the Client Change Wizard, the Subscription Change Wizard, the Location Change Wizard, and the Street Wizard.

Version Type Description ID
TP4

19.1.0.0

 CORR Fixed an issue where RT: (req time) cannot be changed in Schedule Booking Wizard (SBW) for an unscheduled booking when SBW was opened in Dispatch Center. PASS-18160
TP4

19.1.0.0

 CORR There is now a Cancel button in the Schedule Booking Wizard for easy and quick cancellations. Also, the functionality of the Cancel button in the Trip Booking screen has changed. it will now cancel the booking. PASS-18027
TP4 19.2.0.0 ENH DefaultExclGroup option has been added to the Client Change Wizard. PASS-19548
TP4

19.4.0.0

 ENH Fixed an issue where Schedule Booking Wizard was not showing enough solutions. PASS-20835
TP4

19.4.0.0

 ENH Fixed an issue where using the Client Change Wizard removed the SchId from the bookings table. PASS-19441
TP4

19.7.0.0

 CORR Fixed an issue, where booking could not be scheduled due to an unexpected WK violation appearing in Schedule Booking Wizard run itinerary, but not in the solution summary. PASS-21591
TP4 19.8.0.0 CORR Fixed an issue in Find Closest Wizard, where it did not return results. PASS-21697
TP4 19.8.0.0 CORR Fixed an issue, where parameter weight: FavorEarlyWindow did not display in Schedule Booking Wizard. PASS-21849
TP4 19.10.0.0 CORR Fixed an issue where payment type changes for subscription bookings done in the Subscription Change Wizard did not update in live or template bookings. PASS-21176
TP4

19.12.0.0

 CORR Fixed an issue where pull out and break address changes were not reflected in the Schedule Booking Wizard when searched for. PASS-22762
TP4

19.12.0.0

 CORR Fixed an issue where Max OBT was not time stamped on multiple bookings in the Schedule Booking Wizard, which allowed longer on board times. PASS-22366
TP4 19.12.0.0 CORR Fixed an issue where subscription trips could not be activated into a template schedule when using the Subscription Wizard.
TP4 19.13.0.0 CORR Fixed an issue where a three-leg transfer trip was unperformed when solutions were searched for in the Schedule Booking Wizard. Now, solution searches for bookings with arrived/performed events are prohibited. PASS-22912