BlockBuster (Tp5)

Version	Type	Description	ID
19.0.4.0	CORR	The issue of the DSN and Profile information not being saved from the last successful login has been fixed.	FX-11412
19.0.4.0	CORR	The exception error that caused BlockBuster to fail when users attempted to open it has been fixed.	FX-11392
19.0.4.0	ENH	The issue of Travel pay not being costed correctly when there are multiple time bands for a travel between the same node pair on a run has been fixed.	FX-11577
19.0.4.0	CORR	The issue of the Work and Pay Rules/ Piece Pay Rules/Piece Makeup Includes end travel parameter not being applied properly, that is, the Piece Makeup time was not included in the run cost, has been fixed.	FX-11332
19.0.4.0	CORR	The issue of the following parameters: Work and Pay Rules/ Piece Pay Rules/Piece Makeup Includes Prep and Work and Pay Rules/ Piece Pay Rules/Piece Makeup Includes Finish not being applied properly to the run cost has been fixed.	FX-11328
19.0.4.0	CORR	The issue of all garage assignments in a block not being shown when loaded into BlockBuster has been fixed. The issue occurred when there were Exception Off trips attached to the Pull-out and Pull-In times.	FX-11144
19.0.4.0	ENH	The following changes have been made to the Run Scenarios dialog: Users are not allowed to delete their working scenario. A message appears when they attempt to do so. The user's working scenario cannot be set as active even after the scenario list has been re-sorted. The first scenario on the list can be set as active if it is not the user's working scenario. When users attempt to delete an active scenario, a message appears advising them to set a different scenario as active first.	FX-11411
19.0.5.0	CORR	The issue of the shift times of three-piece runs not being calculated properly has been fixed. The issue was related to the order in which the piece break occurs.	FX-10983
19.0.5.0	CORR	The exception access violation error that occurred when users attempted to load runs and match trips or blocks has been fixed.	FX-11476
19.0.5.0	CORR	The issue of the system stopping to respond when users selected the Print Preview function in screens with the Grid view has been fixed. In the Bus Graph screen, the system failed when users opened the Print Preview after setting the margins of the Bus Graph screen to greater than 0 (>0).	FX-11681
19.0.5.0	CORR	The issue of placeholder (empty) fields still being shown in the Percentage Rules pane of the Scenario Details dialog for deleted Percentage Rules has been fixed.	FX-11730
19.0.5.0	CORR	When Created Pull-in and Pull-out relief events are used at a break, BlockBuster now checks for available travel even if both Created pull events are at the same garage. This is to match the way the runs are costed once the Created pull events are applied.	FX-11651
19.0.5.0	CORR	The issue of the block Numbers being reset to their original values when users selected a renumbered block first, and then selected the Id option and the double arrows (>>) button in the Renumber Blocks dialog of the Bus Graphs screen has been fixed. (When the double arrows button is selected, the block Numbers of the selected block should be pushed to the Block Id (Block name) column regardless of the sequence of steps performed to renumber blocks.)	FX-12045

19.0.4.0

CORR

The issue of the DSN and Profile information not being saved from the last successful login has been fixed.

FX-11412

19.0.4.0

CORR

The exception error that caused BlockBuster to fail when users attempted to open it has been fixed.

FX-11392

19.0.4.0

ENH

The issue of Travel pay not being costed correctly when there are multiple time bands for a travel between the same node pair on a run has been fixed.

FX-11577

19.0.4.0

CORR

The issue of the Work and Pay Rules/ Piece Pay Rules/Piece Makeup Includes end travel parameter not being applied properly, that is, the Piece Makeup time was not included in the run cost, has been fixed.

FX-11332

19.0.4.0

CORR

The issue of the following parameters: Work and Pay Rules/ Piece Pay Rules/Piece Makeup Includes Prep and Work and Pay Rules/ Piece Pay Rules/Piece Makeup Includes Finish not being applied properly to the run cost has been fixed.

FX-11328

19.0.4.0

CORR

The issue of all garage assignments in a block not being shown when loaded into BlockBuster has been fixed. The issue occurred when there were Exception Off trips attached to the Pull-out and Pull-In times.

FX-11144

19.0.4.0

ENH

The following changes have been made to the Run Scenarios dialog:

Users are not allowed to delete their working scenario. A message appears when they attempt to do so.
The user's working scenario cannot be set as active even after the scenario list has been re-sorted. The first scenario on the list can be set as active if it is not the user's working scenario.
When users attempt to delete an active scenario, a message appears advising them to set a different scenario as active first.

FX-11411

19.0.5.0

CORR

The issue of the shift times of three-piece runs not being calculated properly has been fixed. The issue was related to the order in which the piece break occurs.

FX-10983

19.0.5.0

CORR

The exception access violation error that occurred when users attempted to load runs and match trips or blocks has been fixed.

FX-11476

19.0.5.0

CORR

The issue of the system stopping to respond when users selected the Print Preview function in screens with the Grid view has been fixed. In the Bus Graph screen, the system failed when users opened the Print Preview after setting the margins of the Bus Graph screen to greater than 0 (>0).

FX-11681

19.0.5.0

CORR

The issue of placeholder (empty) fields still being shown in the Percentage Rules pane of the Scenario Details dialog for deleted Percentage Rules has been fixed.

FX-11730

19.0.5.0

CORR

When Created Pull-in and Pull-out relief events are used at a break, BlockBuster now checks for available travel even if both Created pull events are at the same garage. This is to match the way the runs are costed once the Created pull events are applied.

FX-11651

19.0.5.0

CORR

The issue of the block Numbers being reset to their original values when users selected a renumbered block first, and then selected the Id option and the double arrows (>>) button in the Renumber Blocks dialog of the Bus Graphs screen has been fixed. (When the double arrows button is selected, the block Numbers of the selected block should be pushed to the Block Id (Block name) column regardless of the sequence of steps performed to renumber blocks.)

FX-12045