Schedule Import Properties

Table 1. Schedule Import Property Descriptions
Property	Description
OPS > Interfaces > Schedule Import > Import OPS LineStopLabel	If selected, the system will process Import OPSLineStopLabel. This includes applicable defined UserString supplementary data.
OPS > Interfaces > Schedule Import > Import OPS StopTimes	If selected, the system will process Import OPS StopTimes.
OPS > Work > Fixed Route > Display Import Statistics	If selected, when using Schedule Import or Import into an existing Sign-Up period, a dialog is displayed before starting the import with information about the runs and rosters (if any) being imported. This provides the user the opportunity to cancel the import if necessary.
OPS > Work > Fixed Route > Travel Times Source	Specifies the FX Source to populate the OPSTravels during import: Travel, DeadHead, or DeadHead & Travel.
OPS > Work > Fixed Route > Import BlockBuster > Enforce Complete Import By Division	If selected, all scenarios (service groups) are imported for the selected division.
OPS > Work > Fixed Route > Import BlockBuster > Import Run Extra Pieces	If selected, extra run pieces can be imported.
OPS > Work > Fixed Route > Import BlockBuster > Mapping File	If selected, the field mapping file is enabled in the BlockBuster import.
OPS > Work > Fixed Route > Import BlockBuster > Sign-Off Location > Drive Block Middle Pull-In	Specifies the sign-off location to use for a pull-in in the middle of a block. It can be Relief Node (the end location of the relief run), Travel Node (the location at which the operator ends his travel from the vehicle), or Block Pull In Node (the garage the block ends at).
OPS > Work > Fixed Route > Import BlockBuster > Sign-Off Location > Extra Pieces	Specifies the sign-off location to use for an extra run piece. It can be To Node (the end location of the extra run) or Travel Node (the location at which the operator ends his travel from the vehicle).
OPS > Work > Fixed Route > Import BlockBuster > Sign-Off Location > Pull-In	Specifies the sign-off location to use for pull in. It can be Block Pull In Node (the garage the block ends at) or Travel Node (the location at which the operator ends his travel from the vehicle).
OPS > Work > Fixed Route > Import BlockBuster > Sign-Off Location > Relief	Specifies the sign-off location to use for street relief work. It can be Relief Node (the end location of the relief run) or Travel Node (the location at which the operator ends his travel from the vehicle).
OPS > Work > Fixed Route > Import BlockBuster > Sign-On Location > Driver Block Middle Pull-Out	Specifies the sign-on location to use for a pull out in the middle of a block. It can be Relief Node (the starting location of the relief run), Travel Node (the location from which the operator starts his travel to the vehicle), or Block Pull Out Node (the garage the block begins from).
OPS > Work > Fixed Route > Import BlockBuster > Sign-On Location > Extra Pieces	Specifies the sign-on location to use for an extra run piece. It can be From Node (the starting location of the extra run) or Travel Node (the location from which the operator starts his travel to the vehicle).
OPS > Work > Fixed Route > Import BlockBuster > Sign-On Location > Pull-Out	Specifies the sign-on location to use for pull out. It can be Block Pull Out Node (the garage the block begins from) or Travel Node (the location from which the operator starts his travel to the vehicle).
OPS > Work > Fixed Route > Import BlockBuster > Sign-On Location > Relief	Specifies the sign-on location to use for street relief work. It can be Relief Node (the starting location of the relief run) or Travel Node (the location from which the operator starts his travel to the vehicle).
OPS > Work > Fixed Route > Import Trapeze Run > Sign-Off Location > Drive Block Middle Pull-In	Specifies the sign-off location to use for a pull-in in the middle of a block. It can be Relief Node (the end location of the relief run), Travel Node (the location at which the operator ends his travel from the vehicle), or Block Pull In Node (the garage the block ends at).
OPS > Work > Fixed Route > Import Trapeze Run > Sign-Off Location > Pull-In	Specifies the sign-off location to use for pull in. It can be Block Pull In Node (the garage the block ends at) or Travel Node (the location at which the operator ends his travel from the vehicle).
OPS > Work > Fixed Route > Import Trapeze Run > Sign-Off Location > Relief	Specifies the sign-off location to use for street relief work. It can be Relief Node (the end location of the relief run) or Travel Node (the location at which the operator ends his travel from the vehicle).
OPS > Work > Fixed Route > Import Trapeze Run > Sign-On Location > Driver Block Middle Pull-Out	Specifies the sign-on location to use for a pull out in the middle of a block. It can be Relief Node (the starting location of the relief run), Travel Node (the location from which the operator starts his travel to the vehicle), or Block Pull Out Node (the garage the block begins from).
OPS > Work > Fixed Route > Import Trapeze Run > Sign-On Location > Pull-Out	Specifies the sign-on location to use for pull out. It can be Block Pull Out Node (the garage the block begins from) or Travel Node (the location from which the operator starts his travel to the vehicle).
OPS > Work > Fixed Route > Import Trapeze Run > Sign-On Location > Relief	Specifies the sign-on location to use for street relief work. It can be Relief Node (the starting location of the relief run) or Travel Node (the location from which the operator starts his travel to the vehicle).
OPS > Work > Fixed Route > Integrity Check > FXRosters To Load When Bid Is Active	Specifies the SignId for loading FX Rosters when the bid is active. SignIds are separated by commas.
OPS > Work > Fixed Route > Integrity Check > Resolve Only Non-Posted Dates	If selected, only non-posted days are resolved in the TkWork table when resolving FxRuns.
OPS > Work > Fixed Route > Integrity Check > Starting Date	Specifies the date for starting signups that is used by the integrity checker. Past signups are not considered.
OPS > Work > Fixed Route > Remove Trips And Blocks Zone Segment After Import	If selected, in order to reduce data storage, system will remove trips and blocks zone segment after import.
OPS > Work > Fixed Route > Schedule Import Check > Allow Mid Sign-Up Import Starting On Any Date	If selected, mid sign-up imports can begin on any day of the week.
OPS > Work > Fixed Route > Schedule Import Check > Check Sign-up Date	If selected, perform a check on schedule import to confirm the sign-up period date range is valid.
OPS > Work > Fixed Route > Schedule Import Check > Default Holiday Day Type	Select a default holiday day to type to be added when importing holidays without a day type.
OPS > Work > Fixed Route > Schedule Import Check > Enable	If selected, data is checked when reimporting a schedule or importing into a schedule.
OPS > Work > Fixed Route > Schedule Import Check > Run PayTime Threshold	Specify the number of minutes Pay Time can change for a run before generating a warning message.
OPS > Work > Fixed Route > Schedule Import Check > Run SignOff Threshold	Specify the number of minutes the first SignOff time can change for a run before generating a warning message.
OPS > Work > Fixed Route > Schedule Import Check > Run SignOn Threshold	Specify the number of minutes the first SignOn time can change for a run before generating a warning message
OPS > Work > Fixed Route > Schedule Import Check > Show Daily Schedule Without Data	If selected, check for divisions which have no opsdailyschedleruns or opsdailyschedule blocks for a given date in the import period.
OPS > Work > Work Sources > Demand Response	Specifies the demand response work source. Please reset ancillary/OPS cache data after making changes.
OPS > Work > Work Sources > Excluded Demand Response Runs	Specifies demand response run types that are excluded. Please reset ancillary/OPS cache data after making changes.
OPS > Work > Work Sources > Fixed Route	Specifies the fixed route work source: BlockBuster Runs Fx Runs Hastus 2010 No Import Pass Work sources can be updated on an agency-by-agency basis. Please reset ancillary/OPS cache data after making changes.

OPS > Interfaces > Schedule Import > Import OPS LineStopLabel

If selected, the system will process Import OPSLineStopLabel.

This includes applicable defined UserString supplementary data.

OPS > Interfaces > Schedule Import > Import OPS StopTimes

If selected, the system will process Import OPS StopTimes.

OPS > Work > Fixed Route > Display Import Statistics

If selected, when using Schedule Import or Import into an existing Sign-Up period, a dialog is displayed before starting the import with information about the runs and rosters (if any) being imported. This provides the user the opportunity to cancel the import if necessary.

OPS > Work > Fixed Route > Travel Times Source

Specifies the FX Source to populate the OPSTravels during import: Travel, DeadHead, or DeadHead & Travel.

OPS > Work > Fixed Route > Import BlockBuster > Enforce Complete Import By Division

If selected, all scenarios (service groups) are imported for the selected division.

OPS > Work > Fixed Route > Import BlockBuster > Import Run Extra Pieces

If selected, extra run pieces can be imported.

OPS > Work > Fixed Route > Import BlockBuster > Mapping File

If selected, the field mapping file is enabled in the BlockBuster import.

OPS > Work > Fixed Route > Import BlockBuster > Sign-Off Location > Drive Block Middle Pull-In

Specifies the sign-off location to use for a pull-in in the middle of a block. It can be Relief Node (the end location of the relief run), Travel Node (the location at which the operator ends his travel from the vehicle), or Block Pull In Node (the garage the block ends at).

OPS > Work > Fixed Route > Import BlockBuster > Sign-Off Location > Extra Pieces

Specifies the sign-off location to use for an extra run piece. It can be To Node (the end location of the extra run) or Travel Node (the location at which the operator ends his travel from the vehicle).

OPS > Work > Fixed Route > Import BlockBuster > Sign-Off Location > Pull-In

Specifies the sign-off location to use for pull in. It can be Block Pull In Node (the garage the block ends at) or Travel Node (the location at which the operator ends his travel from the vehicle).

OPS > Work > Fixed Route > Import BlockBuster > Sign-Off Location > Relief

Specifies the sign-off location to use for street relief work. It can be Relief Node (the end location of the relief run) or Travel Node (the location at which the operator ends his travel from the vehicle).

OPS > Work > Fixed Route > Import BlockBuster > Sign-On Location > Driver Block Middle Pull-Out

Specifies the sign-on location to use for a pull out in the middle of a block. It can be Relief Node (the starting location of the relief run), Travel Node (the location from which the operator starts his travel to the vehicle), or Block Pull Out Node (the garage the block begins from).

OPS > Work > Fixed Route > Import BlockBuster > Sign-On Location > Extra Pieces

Specifies the sign-on location to use for an extra run piece. It can be From Node (the starting location of the extra run) or Travel Node (the location from which the operator starts his travel to the vehicle).

OPS > Work > Fixed Route > Import BlockBuster > Sign-On Location > Pull-Out

Specifies the sign-on location to use for pull out. It can be Block Pull Out Node (the garage the block begins from) or Travel Node (the location from which the operator starts his travel to the vehicle).

OPS > Work > Fixed Route > Import BlockBuster > Sign-On Location > Relief

Specifies the sign-on location to use for street relief work. It can be Relief Node (the starting location of the relief run) or Travel Node (the location from which the operator starts his travel to the vehicle).

OPS > Work > Fixed Route > Import Trapeze Run > Sign-Off Location > Drive Block Middle Pull-In

Specifies the sign-off location to use for a pull-in in the middle of a block. It can be Relief Node (the end location of the relief run), Travel Node (the location at which the operator ends his travel from the vehicle), or Block Pull In Node (the garage the block ends at).

OPS > Work > Fixed Route > Import Trapeze Run > Sign-Off Location > Pull-In

Specifies the sign-off location to use for pull in. It can be Block Pull In Node (the garage the block ends at) or Travel Node (the location at which the operator ends his travel from the vehicle).

OPS > Work > Fixed Route > Import Trapeze Run > Sign-Off Location > Relief

Specifies the sign-off location to use for street relief work. It can be Relief Node (the end location of the relief run) or Travel Node (the location at which the operator ends his travel from the vehicle).

OPS > Work > Fixed Route > Import Trapeze Run > Sign-On Location > Driver Block Middle Pull-Out

Specifies the sign-on location to use for a pull out in the middle of a block. It can be Relief Node (the starting location of the relief run), Travel Node (the location from which the operator starts his travel to the vehicle), or Block Pull Out Node (the garage the block begins from).

OPS > Work > Fixed Route > Import Trapeze Run > Sign-On Location > Pull-Out

Specifies the sign-on location to use for pull out. It can be Block Pull Out Node (the garage the block begins from) or Travel Node (the location from which the operator starts his travel to the vehicle).

OPS > Work > Fixed Route > Import Trapeze Run > Sign-On Location > Relief

Specifies the sign-on location to use for street relief work. It can be Relief Node (the starting location of the relief run) or Travel Node (the location from which the operator starts his travel to the vehicle).

OPS > Work > Fixed Route > Integrity Check > FXRosters To Load When Bid Is Active

Specifies the SignId for loading FX Rosters when the bid is active. SignIds are separated by commas.

OPS > Work > Fixed Route > Integrity Check > Resolve Only Non-Posted Dates

If selected, only non-posted days are resolved in the TkWork table when resolving FxRuns.

OPS > Work > Fixed Route > Integrity Check > Starting Date

Specifies the date for starting signups that is used by the integrity checker. Past signups are not considered.

OPS > Work > Fixed Route > Remove Trips And Blocks Zone Segment After Import

If selected, in order to reduce data storage, system will remove trips and blocks zone segment after import.

OPS > Work > Fixed Route > Schedule Import Check > Allow Mid Sign-Up Import Starting On Any Date

If selected, mid sign-up imports can begin on any day of the week.

OPS > Work > Fixed Route > Schedule Import Check > Check Sign-up Date

If selected, perform a check on schedule import to confirm the sign-up period date range is valid.

OPS > Work > Fixed Route > Schedule Import Check > Default Holiday Day Type

Select a default holiday day to type to be added when importing holidays without a day type.

OPS > Work > Fixed Route > Schedule Import Check > Enable

If selected, data is checked when reimporting a schedule or importing into a schedule.

OPS > Work > Fixed Route > Schedule Import Check > Run PayTime Threshold

Specify the number of minutes Pay Time can change for a run before generating a warning message.

OPS > Work > Fixed Route > Schedule Import Check > Run SignOff Threshold

Specify the number of minutes the first SignOff time can change for a run before generating a warning message.

OPS > Work > Fixed Route > Schedule Import Check > Run SignOn Threshold

Specify the number of minutes the first SignOn time can change for a run before generating a warning message

OPS > Work > Fixed Route > Schedule Import Check > Show Daily Schedule Without Data

If selected, check for divisions which have no opsdailyschedleruns or opsdailyschedule blocks for a given date in the import period.

OPS > Work > Work Sources > Demand Response

Specifies the demand response work source. Please reset ancillary/OPS cache data after making changes.

OPS > Work > Work Sources > Excluded Demand Response Runs

Specifies demand response run types that are excluded. Please reset ancillary/OPS cache data after making changes.

OPS > Work > Work Sources > Fixed Route

Specifies the fixed route work source:

BlockBuster Runs
Fx Runs
Hastus 2010
No Import
Pass

Work sources can be updated on an agency-by-agency basis.

Please reset ancillary/OPS cache data after making changes.