Accessing Transfer Wizard

The Transfer Wizard can be access through the Tools menu or on the Details tab of the Itinerary Planing screen.

  • On the main menu, click Tools > Transfer Wizard.
  • On the Details tab of the Itinerary Planning screen, select the itinerary you want on the top grid and right-click anywhere on the bottom grid. From the right-click menu, select Transfer Wizard.

The following table describes the column headers. This section provides instructions on using the Transfer Wizard to view, edit, or create transfers for a single agency or for multiple agencies.

Column Heading Description
(Status)

Displays the status of the transfer. Each transfer is represented by either one of the following symbols:

Enable check box The Enable check box is selected for this transfer and the transfer is actively being used for searching itineraries.

Enable option not selected The Enable check box is not selected for this transfer. The transfer remains in the transfer table but it is inactive and not used to create itineraries.
Note:

The Enable check box does not appear on the screen except in Add or Edit mode.
From Line The route and direction on which passengers begin a transfer trip.
From Stop The stop at which passengers alight from the vehicle traveling along the From line to make a transfer.
From Agency
The agency from which transfers are initiated.
Note: Only for Inter-Agency transfers.
To Line The route and direction on which passengers complete a transfer trip.
To Stop The stop at which passengers board the vehicle traveling along the To line to complete a transfer.
To Agency

The agency to which transfers are completed.

Only for Inter-Agency transfers.
Lvl The priority level of the transfer. Transfers can vary from levels between 1 (high priority) and 10 (low priority). For example, there may be more than one stop near a client’s destination. When searching for an itinerary, a level 1 stop is selected over a level 8 stop. The value set by default is 5.
Min Time The minimum transfer time.
Flag Displays “M” for transfers that have been manually created or edited. No indicator is displayed for transfers created automatically.
Dist The distance between the transfer stops.