You can acquire run times on the trips grid using the extract options.
If you created run time intervals without creating patterns first, extract run times from trips
which have patterns. If you entered your trips directly on the Trips
grid without creating patterns first, extract the patterns before extracting run times.
The following table describes the options on the
Extract tab of the
Run Times Edit dialog box.
Table 1. Extract Options 1
| Time |
| Average |
Average run time |
| Min |
Minimum run time |
| Max |
Maximum run time |
| Mode |
Most frequently occurring run time |
Table 2. Extract Options 2
| Node |
| Max Load Point |
Builds run times based on the maximum load point. This option is only active
if there is an “M” (Maximum) label attached to a node in that direction. The nodes
that are identified as Max Load Points are now shown in blue in the
Trips grid. |
| Build Node |
Calculates the run times based on the build node of the trip. See Setting the
Build Node for more information. |
| First Trip Time |
Builds run times based on the time of the first trip |
Table 3. Extract Options 3
| Time Bands |
| Time Bands |
Enables the system to automatically create the running time of the time bands
|
| No Gaps |
Enable system to prevent gaps between the time periods created |
