System Properties for Eligibility Testing

When setting up eligibility testing, specific system properties settings should be verified before enabling eligibility tests to be run on trip bookings.

Note: Set the Perform Eligibility Tests property to Yes.

Table 1. System Properties for Eligibility Testing
System Property	Description
PASS Booking Client > Eligibility Tests > Custom Method	Reserved for special use only.
PASS Booking Client > Eligibility Tests > Exhaustive Condition Testing	No Testing is limited to tests associated with the selected eligibility condition. Yes Tests for other eligibility conditions associated with this client are also tested if the eligibility condition selected initially does not result in the trip being allowed.
PASS Booking Client > Eligibility Tests > Exhaustive Testing	No Testing stops whenever the trip matches a Deny test. Yes Testing continues when the trip matches a Deny test and may provide additional useful information to the calltaker.
PASS Booking Client > Eligibility Tests > Outcome if no perform	Yes Used if an eligibility condition is set to “do not perform tests”. The default setting is Deny. The recommended value is Allow.
PASS Booking Client > Eligibility Tests > Outcome if no tests	Yes If the Perform Tests option is marked for an eligibility condition but no relevant test is associated with the condition, the trip is allowed. No If the Perform Tests option is marked for an eligibility condition, but no relevant test is associated with the condition, the trip is denied.
PASS Booking Client > Eligibility Tests > Perform Eligibility Tests	Yes The system performs eligibility tests when a trip booking is saved.
PASS Booking Client > Eligibility Tests > Save Denied Trips	No The system does not save trips that fail client eligibility testing. Yes The system saves trips that fail client eligibility testing when users cancel the bookings. Bookings are saved with the default booking subtype for eligibility denial specified by the PASS Booking Client > Default SubType Abbr > Eligibility Denial property.
PASS Booking Client > Eligibility Tests > Services > Host Address	Host Address of the Trapeze6 Service Shell for the eligibility tests.
PASS Booking Client > Eligibility Tests > Services > IP Port	IP Port of the Trapeze6 Service Shell for the eligibility tests.
PASS Booking Client > Eligibility Tests > Services > Service Profile	Profile of the Trapeze6 Service Shell for the eligibility tests.
PASS Booking Client > Eligibility Tests > Show Deny Only	Yes The results dialog box appears only if the trip is denied. No The results dialog box appears in all cases. Trapeze recommends that for initial testing purposes, the results should always be displayed, but when a site puts the feature into production, the this property should be set to Yes.
PASS Booking Client > Eligibility Tests > Test Order	Specifies the order of precedence for determining whether trips are allowed or denied. The order specifies outcomes during eligibility tests depending on whether all required eligibility tests match, sufficient tests match, or deny tests match.